Quick Start with iPhone/Android app

RICOH Support
RICOH Support
  • Updated

There are 4 steps to creating a project:

  • Add a Project
  • Add a Drawing
  • Add a Position
  • Add a 360° Image

1. Add A Project (Team Owner and Team Admin only)

Tap Add Project

IMG_4508.PNG

Add your project information

  • Add your project name
  • Add your address (not required)
  • When you have finished your project information, tap Create

IMG_4509.PNG

 

2. Add your Drawing

Select your project

Tap Add Drawing

IMG_4511.PNG

You can upload a drawing from your camera, library, PDF or a blank drawing

Tap the location of your drawing

Quick_Start_with_iPhone_app04.PNG

Type the name of your drawing and tap Save

IMG_4513.PNG

3. Add Position

Select your drawing

Tap Add Position

IMG_4516.PNG

  • Tap the position on your drawing where you are going to add/take a 360° image 
  • Tap Save

IMG_4518.PNG

4. Add 360° Image using your THETA or Library

Select the "Add 360° Image" button

IMG_4521.PNG

Adding from THETA

If not already done, connect to your RICOH THETA to WiFi

    1. Exit the RICOH360 Projects app
    2. On your iPhone select the iPhone Settings app
    3. Select the THETA WiFi Network
    4. Enter your THETA Password (found on the bottom of your THETA, all numbers, for example if you see YN30123456 your password is 30123456
    5. Connect to your THETA device
    6. Return to the RICOH360 Projects app

Select Add 360° Image

Allow access for Projects to access your photos

Press the blue shutter button on the screen or the shutter button of the RICOH THETA

Press Save to save your image

IMG_4520.PNG

Adding from your Photo Library

Tap Library

IMG_4521.PNG

 

Select the folder that has your 360° image, select the image and Save

 

IMG_4523.PNG

Your 360° image has been added!

Repeat above steps 3 and 4 to digitize your construction site with all of your 360° images!

Was this article helpful?

2 out of 5 found this helpful

Have more questions? Submit a request